Everything you need for a complete photovoltaic system — with price per Wp shown, 21% VAT included and prices transparently computed server-side.
Without this cable the battery and the inverter do not talk to each other. It transmits the state of charge and the battery limits; RJ45-RJ45, 3.5 m on the Pytes V5 B2I version.
Carries the current from the Pytes battery to the inverter on the negative pole (black). Flexible stranded copper, with ring terminals already crimped for the battery terminals.
Carries the current between the Pytes battery and the inverter on the positive pole (red). Flexible stranded copper, with crimped ring lugs for the screw terminals.
A cable that can be buried directly in the ground, with a metal screen protecting against blows. Two copper conductors of 4 mm², 0.6/1 kV, PVC sheath, fire class Dca.
The conductor that earths the structure, the panel frames and the equipment enclosures. 6 mm², flexible copper, halogen-free insulation (LSZH), 450/750 V, flame retardant.
The cable built to stay for years in the sun on the roof: it resists UV, ozone and -40...90 °C. 4 mm², 1.5 kV DC, tinned copper, TÜV Rheinland and AENOR certified.
The red cable marks the plus pole and carries the current from the panels to the inverter. 4 mm², 1.5 kV DC, UV resistant, from -40 °C to 90 °C, TUV and AENOR certified.
The thicker wire loses less energy on long runs or with high current modules. 6 mm², black for the minus pole, 1.5 kV DC, -40...90 °C, TUV certified.
The red 6 mm² variant marks the positive pole and limits losses over long runs. 1.5 kV DC, tinned copper, UV resistant, -40...90 °C, TUV certified.
The alternating current cable between the inverter and the house panel, suitable for burying or mounting outdoors. 3 × 4 mm², 0,6/1 kV, flexible copper, XLPE insulation at 90 °C.
The same construction as the 4 mm² version, but with a thicker wire, for higher powers or long runs. 3 × 6 mm², 0.6/1 kV, flexible copper, XLPE, outdoor installation.
The three-phase connection cable between the inverter and the board, suitable for burying or outdoor installation. 5 × 4 mm², 0.6/1 kV, class 5 flexible copper, XLPE insulation at 90 °C.
The thick three-phase variant, for high-power inverters or long runs. 5 × 6 mm², 0.6/1 kV, flexible copper, XLPE, direct burial and submersion resistance.
The same black 4 mm² solar cable, on a 500 m drum: you cut exactly what you need, with less waste. 1.5 kV DC, -40...90 °C, TUV and AENOR certified.
The red half of the pair on a 500 m drum, for the positive pole: 4 mm², 1.5 kV DC, tinned copper, UV resistant, -40...90 °C, TUV and AENOR certified.
The same solar cable, in black, for the minus pole of the panel strings: 6 mm², type H1Z2Z2-K, 1.5 kV DC, ultraviolet resistant, on a 500 m drum.
The cable that links the panels to each other and to the inverter and stays for years on end in sun, rain and frost: 6 mm², type H1Z2Z2-K, 1.5 kV DC, 500 m drum, red for the plus pole.
The tool with which you tighten and, above all, disconnect locked MC4 connectors; without it they cannot be uncoupled. Original Staubli PV-MS 32.6024 wrench, for MC4 and MC4-Evo 2.
The cable end that couples to the male side of the solar installation. For solar cable with an outer diameter of 5-6 mm, that is cross sections of 4 and 6 mm².
The cable end that goes into the female connector. For solar cable with an outer diameter of 5-6 mm, that is the usual cross-sections of 4 and 6 mm².
The pair of factory-terminated cables between the Pytes E-BOX-48100R battery and the inverter. Amphenol Surlok connector on the battery, ring terminal towards the inverter, 25 mm² (4 AWG).
The pair of 2 m cables for the Pytes V5 battery, factory-terminated: Amphenol Surlok 8 mm on the battery, M8 ring lug at the inverter. 25 mm² (4 AWG), up to about 120 A.
A pair of 2 m cables with a large cross-section, 50 mm², which lets the battery work at maximum current. Amphenol 8 mm on the battery, M10 lug at the inverter or at the DC busbar.
The plug that seals the links between the panels and the inverter and cannot be undone by mistake: MC4-Evo 2 female, 1500 V DC, IP68 once coupled, unlocking only with a tool.
