Statie Incarcare Auto TEISON 3.5 KW

It is a charging station for electric cars intended for houses and garages with an ordinary, single-phase installation. Its great advantage is that you can tell it how much current to draw: if the home has a modest connection or the garage circuit is already loaded, you lower the threshold and charge more slowly, but safely. It is the typical solution for overnight charging, when the car sits still for a few hours anyway.

The supply is at 230 V AC ±10%, and the current is adjusted in steps of 8, 10, 13 and 16 A, which means up to 3.5 kW. As a guideline, at this power a 40 kWh battery charges fully in approximately 11-12 hours, so the unit suits overnight charging or plug-in hybrid cars, which have much smaller batteries. The Type 2 connector is the European standard, compatible with all electric and plug-in hybrid cars sold in Europe. The enclosure has protection rating IP65, that is it withstands dust and water jets and can also stay outside, under a canopy. Fault current protection is built in, so you do not depend on a special residual current device in the switchboard.

AC charging in Mode 3, 230 V AC ±10% single-phase, adjustable current 8/10/13/16 A, rated power 3.5 kW, Type 2 connector according to IEC 62196-2. Fault current detection of 30 mA in alternating current plus 6 mA in direct current, that is exactly the combination required by the standards for charging electric vehicles when the switchboard does not have a dedicated type B residual current device. IP65 enclosure, compliance with IEC 61851-1 and IEC 62752. The specifications above correspond to the 3.5 kW Teison range; for the exact configuration (cable length, supply plug type, availability of the app) please confirm the marketed variant.

Who it suits

Suitable for a home with a single-phase connection and limited available power, for a plug-in hybrid car or for a city electric car charged overnight.

Terms explained

• Charging Mode 3: Charging through a fixed station, which communicates permanently with the car and cuts off the current if a problem appears, unlike a simple socket cable.
• Type 2 connector: The standard socket for electric cars in Europe; all electric cars and plug-in hybrids sold here use it.
• 30 mA AC + 6 mA DC protection: The station cuts off the supply if a current leakage to earth appears, both in alternating current and in direct current, the type that ordinary fuses do not detect.

Technical specifications

Recommended applications

• Home charging on a single-phase circuit, with limited available power
• Overnight charging for plug-in hybrids and city cars
• Backup station for holiday homes or a second location
• Use in garages and semi-outdoor spaces, thanks to the IP65 rating

Technical details

Series-level specifications — valid for the product family

The 3.5 kW Teison charging station is a single-phase solution for AC charging in Mode 3, supplied at 230 V AC ±10%. The charging current is adjustable in steps of 8, 10, 13 and 16 A, which allows adaptation to the available power of the connection - a real advantage in flats and garages where the existing circuit cannot take the maximum continuous load.

The connection to the vehicle is made with a Type 2 connector according to IEC 62196-2, compatible with all electric and plug-in hybrid cars sold in Europe. The electrical protection includes fault current detection, with 30 mA in alternating current and 6 mA in direct current, that is exactly the combination required by the standards for charging electric vehicles when the switchboard does not have a dedicated type B residual current device.

The enclosure has protection rating IP65, so it withstands dust and water jets, and can also be used outdoors, under a canopy. The product complies with the standards IEC 61851-1 and IEC 62752 for electric vehicle charging equipment. At 3.5 kW, a 40 kWh battery charges fully in approximately 11-12 hours, which makes the unit suitable for overnight charging or for plug-in hybrid cars with small batteries.

Attention: the specifications above correspond to the 3.5 kW Teison range; for the exact configuration (cable length, supply plug type, presence of the app) please confirm the marketed variant.