Deye SUN-EVSE11K01-EU-AC

Deye SUN-EVSE11K01-EU-AC is a charging station you mount on the garage wall or outdoors, so as to charge your electric car at home, instead of looking for public stations. It has its own cable attached, so you just take it out of the holder and connect it to the car. The most interesting part is that it can take the energy from the surplus of your panels, that is from the current you would have sent to the grid anyway.

With 11 kW on a three-phase connection, it charges about three times faster than an ordinary household socket, and the fixed 4.2 m cable comfortably reaches the car no matter how you park it. The enclosure has IP66 protection and works from -40 to +55 degrees C, so it can stay outdoors, in the rain or in frost; with 3.7 kg and 104 x 264 x 58 mm it is mounted on a wall or on a post without special brackets, and the noise of 25 dB is practically imperceptible. If you have a Deye hybrid inverter, the station connects to it by radio, over LoRa, with a range of up to 200 m - without data cables - and charges the car with priority from the photovoltaic surplus, after the house battery has filled up. If you do not have a hybrid inverter, you control it over Wi-Fi from the Deye Cloud app, and the charging can start in three ways: as soon as you connect the cable, after scanning, or at the scheduled time.

Mode 3 AC station, supply 3L+N+PE at 400 V AC, range 0.8...1.15 Un, 50/60 Hz, rated current 16 A, maximum power 11 kW, fixed cable with one gun, 4.2 m. Integrated protections against overtemperature and low temperature, overvoltage, undervoltage, short circuit, overload and earth fault, 6 mA DC residual current detection and Type II surge arrester. IP66, -40...+55 °C, humidity 5-95% non-condensing, altitude up to 3000 m, 25 dB, 104 x 264 x 58 mm, 3.7 kg. LoRa communication in the 863-870 MHz band with an internal 0.56 dBi antenna and a range of up to 200 m (coupling to a Deye hybrid inverter through the Smart-TX01 transmitter), plus Wi-Fi and Bluetooth; compliance with EN IEC 61851-1:2019 and EN IEC 61851-21-2:2021, EU declaration for the RED and RoHS directives.

Who it suits

Suitable for a house with a three-phase connection and an electric car used daily, especially if a Deye hybrid inverter is already there, from whose surplus it can charge.

Terms explained

• Three-phase: The type of connection with three phases, which allows higher powers than the single-phase one - hence the 11 kW of charging.
• Photovoltaic surplus: The energy the panels produce beyond what the house consumes; instead of going to the grid, it can go into the car's battery.
• 6 mA DC current detection: A protection that senses direct current leakages to earth and stops the charging, protecting the person and the installation.

Technical specifications

Recommended applications

• Home charging on a three-phase connection, in the garage or outdoors
• Photovoltaic self-consumption: charging the car from the surplus of a Deye hybrid system
• Private car parks of offices and company headquarters
• Outdoor installations exposed to the weather, thanks to the IP66 rating

Warranty

5 years

Technical details

Specifications confirmed from the manufacturer's datasheet

Deye SUN-EVSE11K01-EU-AC is an AC (Mode 3) charging station for electric vehicles, supplied three-phase 400 V AC in the 3L+N+PE scheme, with a rated current of 16 A and a maximum output power of 11 kW. The accepted voltage range is 0.8...1.15 Un at 50/60 Hz, and the unit delivers the energy through a fixed cable with a single charging gun, 4.2 m long.

The safety side is fully integrated in the wallbox: protection against overtemperature and low temperature, against overvoltage and undervoltage, against short circuit, against overload, against earth fault, plus 6 mA DC residual current detection and a Type II surge arrester. The enclosure has an IP66 protection rating and works between -40 and +55 °C, at a humidity of 5-95% non-condensing and up to 3000 m altitude; the declared noise level is 25 dB. The body measures 104 x 264 x 58 mm and weighs 3.7 kg, so it is easily mounted on a wall or on a post.

Communication is done over LoRa, Wi-Fi and Bluetooth. The LoRa module works in the 863-870 MHz band with an internal 0.56 dBi antenna and a range of up to 200 m, which allows the station to be linked directly to a Deye hybrid inverter (through the Smart-TX01 transmitter), without additional wiring. In this mode the station can charge with priority from the photovoltaic surplus, after the battery has been charged. Without a hybrid inverter, the station can be controlled directly over Wi-Fi and the Deye Cloud app.

The charging can be started in three ways: Plug and Play (immediately, when the cable is connected), charging after scanning, or hourly scheduling. The product complies with EN IEC 61851-1:2019 and EN IEC 61851-21-2:2021, with an EU declaration of conformity for the RED and RoHS directives, and comes with a 5-year warranty.