Astreea SmartCharger wall-mounted EV charging station 2x22 kW (Without cable)

It is a wall-mounted charging point that serves two electric cars at the same time, from a single body. It has two sockets protected with a shutter, i.e. an automatic cover over the contacts, and each driver uses the cable supplied with their own car. Being wall-mounted, it requires no foundation and takes up no space on the driveway. The cylindrical stainless steel body is slim and impact-resistant.

The two points each deliver up to 22 kW, i.e. 44 kW installed in a single device; as a guideline, one hour at 22 kW means around 22 kWh going into the battery, if the car accepts that power on alternating current. In practice, you double the capacity of a parking wall without additional foundation works. The device has a 114 mm diameter and weighs 12 kg, so it can be mounted on any wall properly chosen by the electrician. It works between -30 and +60 °C, at 5-95% humidity without condensation, and the shock and tilt sensors automatically stop charging on impact. Dynamic load balancing splits the power between the two points, so that the total fits within the available connection - important when the building has no spare power.

Product code ACS2211, supply 3Ph + N + PE, 400 V, two 32 A circuits, two Type 2 sockets with shutter (T2S), cables not included. Type A RCBO protection 30 mA / 40 A, with residual current monitoring and protections against overcurrent, overvoltage, undervoltage and earth fault; IP54 and IK10. Communication Wi-Fi 2.4 GHz, Bluetooth 5 (BLE), Ethernet and 4G modem, with OCPP 1.6 (OCPP 2.0.1 in preparation), Modbus RTU, NFC and Plug & Charge ISO 15118-20. Compliance with IEC 61851-1:2019, IEC 61851-21-2:2021, the Low Voltage Directive 2014/35/EU and RED 2014/53/EU, with the option of MID and Eichrecht certification in the version with a display.

Who it suits

Suitable for a residential block car park, an office or a hall where two adjacent spaces must be served, and the users are known and have their own cable.

Terms explained

• Simultaneous charging of two vehicles: The two sockets work at the same time, each with its own circuit, not one after the other.
• Dynamic load balancing: The device automatically reduces the power when both cars are charging, so as not to exceed what the building's connection can carry.
• MID / Eichrecht: Certifications attesting that the energy metered by the station can be legally used for billing users.

Technical specifications

Recommended applications

• Underground and covered car parks with two spaces served by a single body
• Company premises and employee car parks
• Residential complexes and block car parks
• Semi-public charging networks managed through OCPP

Warranty

2 years

Technical details

Specifications confirmed from the manufacturer's datasheet

The wall-mounted vertical Astreea SmartCharger, dual version (code ACS2211), is the range's wallbox with two charging points. The supply is three-phase 3Ph + N + PE, 400 V, with two circuits of 32 A each and a maximum power of 2 x 22 kW, i.e. 44 kW installed in a single wall-mounted body. The two vehicles can be charged simultaneously, which doubles the capacity of a parking wall without additional foundation works.

The station has two Type 2 sockets with shutter (T2S), with no cables included - each user uses their own cable. The cylindrical stainless steel body has a diameter of 114 mm and a weight of 12 kg. Electrical protection is provided by a type A RCBO of 30 mA / 40 A, with residual current monitoring and protections against overcurrent, overvoltage, undervoltage and earth fault. Mechanically, it offers IP54 and IK10, with shock and tilt sensors that automatically stop charging in case of an incident.

It works between -30 and +60 °C, at 5-95% humidity without condensation. Connectivity comprises Wi-Fi 2.4 GHz, Bluetooth 5 (BLE), Ethernet and a 4G modem, with the protocols OCPP 1.6 (OCPP 2.0.1 in preparation), Modbus RTU, NFC and Plug & Charge according to ISO 15118-20. The station performs dynamic load balancing between the two points, so that the total power fits within the available connection. Compliance with IEC 61851-1:2019, IEC 61851-21-2:2021, the EU Low Voltage Directive 2014/35/EU and RED 2014/53/EU, with the option of MID and Eichrecht certification in the version with a display.