DEYE SUN-EVSE22K01 electric car charger - 22 kW, three-phase

This is the charging station that is mounted on the wall and replaces the emergency cable in the boot. It has its own fixed cable, so you get home, you connect it to the car and that is it. Being supplied on three phases, it delivers 22 kW, a power about three times greater than the 7 kW available on a single-phase connection, which means that the car charges in a fraction of the time. In addition, if you already have photovoltaic panels with a Deye hybrid inverter, the station can use with priority the energy that would be surplus anyway.

The rated current is 32 A, and the resulting power depends on your connection: 7 kW if you are connected single-phase at 230 V, 22 kW if you have three-phase at 400 V. The fixed cable is 4.2 m, enough for most garages and driveways, and for the supply a 4 mm² cable is recommended. The body measures 104 x 264 x 58 mm and weighs 3.7 kg, so it does not take up space on the wall, and the IP66 enclosure and the operating range -40...+55 °C allow it to be installed outdoors, without a canopy. The link with a Deye hybrid inverter is made wirelessly, through LoRa, and the station charges from the photovoltaic surplus only after the consumption of the house has been covered and the battery has been charged. If you do not have a hybrid inverter, the station works independently through Wi-Fi and the Deye Cloud app, from where you start it remotely and adjust its charging current; starting can be done directly on connection, by scanning or according to a time schedule. The warranty is 5 years.

SUN-EVSE22K01-EU-AC: supply 230 V a.c. in an L+N+PE scheme or 400 V a.c. in a 3L+N+PE scheme, range 0.8...1.15 Un, 50/60 Hz, rated current 32 A, a single gun on a fixed 4.2 m cable, recommended supply cross-section 4 mm² (10 AWG). Protections against overtemperature and low temperature, overvoltage, undervoltage, short circuit, overload and earth fault, 6 mA direct residual current detection and Type II surge arrester. IP66, -40...+55 °C, humidity 5-95% without condensation, altitude up to 3000 m, noise 25 dB, overall size 104 x 264 x 58 mm, weight 3.7 kg. LoRa communication 863-870 MHz with an internal 0.56 dBi antenna and a range of up to 200 m, plus Wi-Fi and Bluetooth; in accordance with EN IEC 61851-1:2019 and EN IEC 61851-21-2:2021, with an EU declaration of conformity (RED, RoHS).

Who it suits

Suitable for a house with a three-phase 32 A connection and a car that accepts 22 kW in alternating current, especially if there is already a Deye hybrid photovoltaic system from whose surplus it can charge.

Terms explained

• AC charging (alternating current): The station sends the current from the grid to the charger in the car, which does the conversion; the final speed also depends on how much the car accepts, not only on the station.
• LoRa: A long-range, low-consumption radio link, through which the station talks directly to the inverter, without a data cable and without internet.
• 6 mA d.c. residual current detection: A protection that stops charging if a direct current leakage to earth appears, a situation that the ordinary fuses in the board do not detect.

Technical specifications

Recommended applications

• Fast AC charging at home, on a three-phase 32 A connection
• Company headquarters and private car parks with vehicles that accept 22 kW AC
• Photovoltaic self-consumption: charging from the surplus of a Deye hybrid system through LoRa
• Outdoor installation in harsh conditions (IP66, -40...+55 °C)

Warranty

5 years

Technical details

Specifications confirmed from the manufacturer's datasheet

Deye SUN-EVSE22K01-EU-AC is the highest-power AC charging station in the Deye range, with a flexible supply: 230 V a.c. in an L+N+PE scheme (single-phase) or 400 V a.c. in a 3L+N+PE scheme (three-phase), in both cases with a range of 0.8...1.15 Un and a frequency of 50/60 Hz. The rated current is 32 A, which means 7 kW on a single-phase connection and 22 kW on a three-phase connection. The energy is delivered through a single charging gun, on a fixed 4.2 m cable.

Safety is ensured through protections against overtemperature and low temperature, overvoltage, undervoltage, short circuit, overload and earth fault, to which are added the 6 mA direct residual current detection and the Type II surge protection. The enclosure has an IP66 protection rating, works in the range -40...+55 °C, at a humidity of 5-95% without condensation and an altitude of up to 3000 m, with a noise level of 25 dB. The body measures 104 x 264 x 58 mm and weighs 3.7 kg. The recommended cross-section for the supply cable is 4 mm2 (10 AWG).

Communication is via LoRa (863-870 MHz, internal 0.56 dBi antenna, range up to 200 m), Wi-Fi and Bluetooth. Through LoRa the station connects directly to a Deye hybrid inverter and can charge with priority from the photovoltaic surplus, after the consumption of the house has been covered and the battery charged; without a hybrid inverter, the station works autonomously through Wi-Fi and the Deye Cloud app, with remote control and adjustment of the charging current. Starting can be done Plug and Play, by scanning or by time schedule.

The product complies with EN IEC 61851-1:2019 and EN IEC 61851-21-2:2021, with an EU declaration of conformity (RED, RoHS), and has a 5-year warranty.