Deye RW-F16 battery, 16 kWh, LiFePo4
Autonomy for a whole evening: 16 kWh, of which 14.4 kWh usable, 160 A continuous and a 300 A peak for appliances that are hard to start.
Large autonomy and winter resistance: 16,07 kWh in an IP66 enclosure with heating, 8000 declared cycles and an integrated aerosol extinguisher.
Pytes V16 is a house battery that gathers the energy produced by the panels and makes it available when the sun no longer works. It is enclosed in a sealed housing, suitable both for indoors and outdoors, and it has a heating pad that starts in the cold, so that it can also charge in winter. Inside the enclosure an aerosol extinguisher is also fitted, which acts automatically if a fire appears, plus a switch that cuts the direct current.
16,07 kWh cover roughly the evening and night consumption of a large house, including a heat pump. The battery charges at 125 A, that is 6,4 kW, and delivers 150 A continuously, that is 7,68 kW, with a maximum of 200 A (10,245 kW) when needed. The declared service life is 8000 cycles, roughly over 20 years at one charge-discharge a day, and at their end the battery still keeps 70% of the capacity. It occupies 700 x 671 x 260 mm and weighs about 130 kg, so it is fixed on a load-bearing wall or set on a slab. The heating pad is active between -18 and 15 degrees C, so that in winter you do not lose the charging cycles.
51,2 V nominal, range 46,5-56,8 V, 314 Ah, 16,07 kWh; charge current 125 A (6,4 kW), discharge 150 A (7,68 kW), maximum 200 A (10,245 kW). Service life 8000 cycles at 90% DoD and 70% EOL; discharge between -20 and 55 degrees C, heating pad active between -18 and 15 degrees C. The IP66 enclosure allows indoor or outdoor mounting, on the wall or on the ground, at 700 x 671 x 260 mm and approx. 130 kg; equipped with a DC switch, pre-charge circuit and aerosol suppression module. Communication RS485, CAN, WiFi and dry contact, in closed loop with the main inverter brands; certifications UN38.3, CE, IEC62619, UL1973, UL9540, UL9540A, CEC, SGIP, 10 years warranty.
Suitable for a large home, with a heat pump or a charger for an electric car, in areas with severe winters where the battery stays outdoors.
| Chemistry | LFP (LiFePO4) |
|---|---|
| Rated energy | 16,07 kWh (314 Ah) |
| Voltage | 51,2 V (46,5-56,8 V) |
| Charge / discharge current | 125 A (6,4 kW) / 150 A (7,68 kW), max. 200 A |
| Cycles | 8000 at 90% DoD, 70% EOL |
| Dimensions / mass | 700 x 671 x 260 mm / approx. 130 kg |
| Protection | IP66 |
| Heating | integrated pad active between -18 and 15 degrees C |
| Safety | DC switch, pre-charge, aerosol suppression |
| Communication | RS485 / CAN / WiFi / dry contact |
10 years
Specifications confirmed from the manufacturer's datasheet
Pytes V16 is an LFP battery of 16,07 kWh with 314 Ah at 51,2 V and a working range of 46,5-56,8 V. The recommended charge current is 125 A (6,4 kW), the discharge one 150 A (7,68 kW), and the maximum discharge current reaches 200 A (10,245 kW). The declared service life is 8000 cycles at 90% DoD and 70% EOL, above the average of the residential segment.
The IP66 enclosure allows indoor or outdoor mounting, on the wall or on the ground, with dimensions of 700 x 671 x 260 mm and a mass of approx. 130 kg. The integrated heating pad is active between -18 and 15 degrees C, allowing charging in wintertime; the discharge range is -20...55 degrees C. The battery includes a DC switch, a pre-charge circuit and an aerosol suppression module. Communication is done via RS485, CAN, WiFi and dry contact, in closed loop with the main inverter brands. Certifications: UN38.3, CE, IEC62619, UL1973, UL9540, UL9540A, CEC, SGIP.