Canadian CS6.2-66TM-625

It is a large panel, designed for projects where it matters how fast and how cheaply you reach the desired power. It produces current only on the front, has glass on the front and a white backsheet on the back - a lighter construction than the version with glass on both faces. Being powerful per piece, you need fewer panels, fewer clamps and less cable for the same total power.

One panel gives 625 W under standard conditions, at an efficiency of 23.14%, so ten pieces exceed 6 kW installed. It weighs 28.1 kg with a footprint of 2382 x 1134 mm, that is almost 5 kg less than the bifacial version of the same size - it is easier to handle and loads the supporting structure less. In heat it loses only 0.29% of its power per degree, and the usual operating temperature is 41 degrees C. It withstands 5400 Pa of snow pressure on the front and 2400 Pa on the back and has been tested for hail with 25 mm ice balls. The linear power warranty is 30 years, with a maximum of 1% degradation in the first year and a maximum of 0.4%/year afterwards.

STC: 625 W, Vmp 41.4 V, Imp 15.11 A, Voc 48.6 V, Isc 16.14 A, efficiency 23.14%. Coefficients -0.29 %/degree C (Pmax), -0.25 %/degree C (Voc), +0.045 %/degree C (Isc), NOCT 41 +/- 2 degrees C. Laminate of 132 monofacial N-type TOPCon half-cells in G12R format (210 x 182 mm), front glass with white backsheet on the back, anodised aluminium frame, 2382 x 1134 x 35 mm, 28.1 kg. IP68 junction box with 3 bypass diodes, MC4 connectors or equivalent; tested for hail with 25 mm balls according to IEC 61215.

Who it suits

Suited to industrial halls, industrial buildings and ground-mounted parks, where low cost per watt and a small number of modules to install are sought.

Terms explained

• Monofacial: The panel produces current only with the face exposed to the sun, unlike the bifacial ones, which also use the light reflected from behind.
• Cost per installed watt: How much each watt of installed power costs, including labour and structure; large panels reduce it because fewer pieces are installed.
• IP68 junction box: The sealed housing on the back of the panel, into which the cables enter; IP68 means fully protected against dust and water.

Technical specifications

Recommended applications

• Commercial and industrial roof installations
• Ground-mounted photovoltaic parks on fixed structures
• Projects where low cost per watt and a small number of modules matter

Warranty

30-year linear power warranty according to the Canadian Solar policy for the TOPHiKu6 series (max. 1% degradation in the first year, max. 0.4%/year afterwards)

Technical details

Series-level specifications — valid for the product family

CS6.2-66TM-625 is the high-power monofacial version of the TOPHiKu6 family, with 132 N-type TOPCon half-cells in G12R format (210x182 mm), front glass and white backsheet on the back, in an anodised aluminium frame. Compared with the bifacial dual-glass version, this construction reduces the weight to 28.1 kg for the same footprint of 2382 x 1134 mm, which simplifies handling and lowers the load on the structure.

At STC the module produces 625 W, with Vmp 41.4 V, Imp 15.11 A, Voc 48.6 V and Isc 16.14 A, at an efficiency of 23.14%. The temperature coefficients are -0.29 %/degree C for Pmax, -0.25 %/degree C for Voc and +0.045 %/degree C for Isc, and the NOCT is 41 +/- 2 degrees C.

The junction box is IP68 with 3 bypass diodes, the connectors MC4 or equivalent. The permissible mechanical load is 5400 Pa on the front and 2400 Pa on the back, and the hail test is done with 25 mm balls according to IEC 61215. The module lends itself to commercial and industrial applications where low cost per installed watt and a small number of modules for a given power are sought.