Triangular support at 15 degrees

On a flat roof, panels laid horizontally would produce less and would get dirty faster. These supports form metal triangles that raise the modules to 15 degrees, like a deckchair tilted towards the sun. They are delivered folded, so that they take up little space in transport, and are unfolded at installation into their final shape.

A set contains 5 triangular supports and weighs 17.90 kg in total, so it is carried up onto the flat roof without machinery. Unfolded, they reach a length of 2626 mm, and the resulting tilt of 15 degrees is a good compromise: enough for water run-off and self-cleaning, but small enough that the rows of panels do not shade each other from large distances and that the wind does not push strongly on the structure. The steel with an anti-corrosion coating requires no maintenance. Note: the set contains strictly the supports - the module clamps, the fixing elements and the wind deflectors are ordered separately, depending on the configuration chosen.

Product code XFS_PB094.1.001_KPL, EAN 5904378630300, set of 5 pieces, total weight 17.90 kg, unfolded length 2626 mm, angle 15 degrees. Construction of quality steel with a special anti-corrosion layer, chosen for high rigidity under wind and snow loads, a reduced number of components and compact transport. Basic element of the Corab PB-094 system for flat roofs, with a permitted slope of the supporting roof between 0 and 5 degrees, in a south orientation (with wind deflector) or east-west; the invasive variant, with mechanical fixing, is PI-094. The components are intended exclusively for use within the PB-094 system. Corab warranty: 10 years standard, extendable to 15 years through registration and up to 25 years on coating and perforation.

Who it suits

Suitable for concrete or membrane flat roofs, with a slope of at most 5 degrees, in residential and low-power commercial installations from the Corab PB-094 system.

Terms explained

• Unfolded length: The dimension of the support after it is unfolded at installation; in transport it comes folded and takes up much less space.
• Anti-corrosion coating: A protective layer applied to steel, which prevents rust over years of exposure to rain and frost.
• Wind deflector: A sheet metal panel mounted behind the modules, which deflects the wind and reduces the uplift force on the structure.

Technical specifications

Recommended applications

• Structure tilted at 15 degrees on flat roofs of concrete or membrane
• Residential and low-power commercial installations on flat roofs
• South or east-west oriented configurations from the Corab PB-094 system
• Ballasted or invasive installation, depending on the accessories chosen

Warranty

Corab policy for mounting structures: 10 years standard, extendable to 15 years through registration, up to 25 years on coating and perforation

Technical details

Specifications confirmed from the manufacturer's datasheet

The triangular support at 15 degrees is the basic element of the Corab PB-094 system for flat roofs. It is delivered in a set of 5 pieces, code XFS_PB094.1.001_KPL, EAN 5904378630300, with a total weight of 17.90 kg per set. The supports are delivered folded and are unfolded at installation to a length of 2626 mm, forming the supporting triangle that gives the 15-degree tilt of the modules.

The construction is of quality steel coated with a special anti-corrosion layer, a solution chosen by Corab for high rigidity under wind and snow loads, with a reduced number of components and compact transport. The PB-094 system permits a slope of the supporting roof between 0 and 5 degrees and is intended for residential and low-power installations, in a south orientation (with wind deflector) or east-west.

The set contains strictly the triangular supports. The fixing elements, the module clamps and the wind deflectors are not included and are ordered separately, depending on the configuration chosen: the ballasted variant (PB-094) or the invasive variant, with mechanical fixing into the roof (PI-094). The components are intended exclusively for use within the PB-094 system.