Suport pentru tabla faltuita R-037

Standing seam sheet metal roofs have vertical ribs, the edges of two metal sheets folded one over the other. These clamps grip mechanically exactly onto that rib, like a vice, and no hole is made in the roof. This way the covering remains watertight, and the warranty given by the roof manufacturer is not lost.

The set contains 10 clamps and weighs 3.62 kg in total, enough to usually fix a short row of panels; how many clamps are needed depends on the distance between the seams and on the wind and snow loads in the area. The contact area with the sheet metal has additional insulation, which protects the covering against mechanical damage at tightening and limits direct contact between different metals. The support has adjustable positioning, so the rails can be correctly aligned even if the distance between the seams does not match exactly the fixing points of the panels. It is the standard solution for zinc-titanium, aluminium or pre-painted steel roofs, where any penetration would be a problem.

Code XFS_R037.1, EAN 5904378627386, 10 clamps/set, mass 3.62 kg, stainless steel, fixing by tightening onto the seam without drilling, with insulation on the contact area and adjustable positioning. The longitudinal aluminium rail is mounted on the upper part of the clamp, and the modules are fixed with mid and end clamps. The number of clamps is determined depending on the seam spacing and on the wind and snow loads. Corab warranty for mounting structures: 10 years standard, extendable to 15 years through registration.

Who it suits

Suitable for houses, halls or public buildings with a standing seam sheet metal roof, where the watertightness and the warranty of the covering cannot be put at risk.

Terms explained

• Standing seam sheet metal: A roof made of metal sheets joined by folding, with visible vertical ribs and without exposed screws.
• Seam: The vertical rib formed at the joint of two metal sheets; the clamp is tightened onto it.
• Zinc-titanium: A zinc alloy used for quality standing seam coverings, sensitive to drilling and to direct contact with other metals.

Technical specifications

Recommended applications

• Mounting photovoltaic modules on standing seam sheet metal roofs, without penetration
• Coverings of zinc-titanium, aluminium or pre-painted steel with a vertical seam
• Buildings where the watertightness warranty of the covering must be maintained
• Halls, public buildings and houses with a standing seam metal covering

Warranty

Corab policy for mounting structures: 10 years standard, extendable to 15 years through registration

Technical details

Specifications confirmed from the manufacturer's datasheet

Corab R-037 is a fixing set for standing seam sheet metal roofs (sheet metal with vertical seam or double seam), code XFS_R037.1, EAN 5904378627386, delivered with 10 clamps and a total mass of 3.62 kg.

The clamps are tightened mechanically onto the seam of the sheet metal, without drilling and without penetrating the covering, which fully preserves the watertightness of the roof and the warranty of the covering manufacturer. This is the standard solution for standing seam roofs of zinc-titanium, aluminium or pre-painted steel, where any penetration is undesirable.

The clamp is made of stainless steel, and the contact surface with the sheet metal is provided with additional insulation which protects the covering against mechanical damage at tightening and limits direct contact between different metals. The support has adjustable positioning, which allows precise alignment of the longitudinal rails even when the distance between the seams does not correspond exactly to the fixing spacing of the modules.

The longitudinal aluminium rail is mounted on the upper part of the clamp, and on it the photovoltaic modules with mid and end clamps. The set of 10 pieces usually covers the fixing of a short row of modules; the necessary number of clamps is determined depending on the wind and snow loads and on the seam spacing.