Click-in mounting system PB-094 L2818 15DGE Horizontal

It is the structure that holds the panels on a flat roof, raising them to 15 degrees. It can be laid out either with all the panels facing south, or in an east-west configuration, that is on two opposite slopes, like a miniature roof. The second variant fits better on the available surface and spreads the output over the whole day, instead of concentrating it at midday.

The small angle of 15 degrees has two concrete advantages for the owner: the rows can be placed closer to each other than in the 25 degree versions, so more panels fit on the same terrace, and the wind presses less on the structure, which means less ballast and a smaller load on the roof. It is therefore the preferred choice where the roof has a limited load-bearing capacity or a restricted surface. The triangular supports are delivered folded, the number of components is reduced, and the installation is quick. The supporting roof can have a slope of up to 5 degrees. There is also an invasive version, with mechanical anchoring, under the name PI-094.

A system from the Flexi family, made of quality steel with a special anti-corrosion layer, declared for residential and low-power installations. In the Corab catalogue, the 15 degree set in horizontal layout appears as PB-094.1, code XFS-PB094.1, with triangular supports of unfolded length 2626 mm (set of 5 pieces, code XFS_PB094.1.001_KPL, 17.90 kg). The south orientation is completed with a wind deflector. Transparency note: the commercial name in the list indicates the length L2818, which in the Corab catalogue corresponds to the 25 degree version (PB-092); for 15 degrees the manufacturer lists an unfolded length of 2626 mm, which is why we recommend confirming the exact code when ordering. Corab warranty: 10 years standard, extendable to 15 years by registration and up to 25 years on the coating and perforation.

Who it suits

Suitable for terraces with a slope of up to 5 degrees and a limited load-bearing capacity, where a high panel density and the smallest possible ballast are wanted.

Terms explained

• East-west configuration: The panels are laid out on two opposite slopes, like a gable roof; the output is spread from morning to evening, instead of being concentrated at midday.
• Load-bearing capacity: How much additional weight the roof can safely support, including the structure, the panels, the ballast and the snow.
• Invasive mounting: The structure is anchored with screws into the roof, instead of being held by weights; it is used when the wind is strong or ballast is not possible.

Technical specifications

Recommended applications

• Installations on residential and low-power flat roofs
• East-west configurations for a high module density on the available surface
• Roofs with a limited load-bearing capacity, where reduced ballast is required
• Terraces with a slight slope, up to 5 degrees

Warranty

Corab policy for mounting structures: 10 years standard, extendable to 15 years by registration, up to 25 years on the coating and perforation

Technical details

Series-level specifications — valid for the product family

Corab PB-094 is part of the Flexi family and is a structure for flat roofs with modules tilted at 15 degrees. The system can be built both in a south orientation, in which case it is completed with a wind deflector, and in an east-west configuration, which makes better use of the available surface and flattens the daily production curve. There is a ballasted version (PB-094) and an invasive version, with mechanical anchoring (PI-094).

The structure is made of quality steel covered with a special anti-corrosion layer. The manufacturer indicates a quick and intuitive installation, a reduced number of components and easy transport, the triangular supports being delivered folded. The allowed slope of the supporting roof is 0 to 5 degrees, and the declared target field is the residential one and that of low-power installations.

In the Corab catalogue, the 15 degree set in horizontal layout is listed as PB-094.1, code XFS-PB094.1, with triangular supports of unfolded length 2626 mm (set of 5 pieces, code XFS_PB094.1.001_KPL, 17.90 kg). The smaller angle of 15 degrees reduces the distance needed between rows compared with the 25 degree versions and lowers the wind load, being preferred on roofs with a limited load-bearing capacity or a restricted surface.

Transparency note: the name in the batch indicates the length L2818, which in the Corab catalogue corresponds to the 25 degree version (PB-092); for 15 degrees the manufacturer lists an unfolded length of 2626 mm. We recommend confirming the exact code when ordering.